Wool balls, for a soft pillow that stays springy
Your answers point to a pillow of small felted wool balls in a zipped case, filled toward the soft end and topped up later if it needs it.
Updated .
In short: Felted wool balls in a zipped case, kept on the soft side of the fill range, and aired in the sun while the cover goes in the wash.
The construction
| The construction | Specification and source |
|---|---|
| Construction | Small felted wool balls, which one maker's spec calls Traceable Wool Balls (Wool Bolus), loose in a case that you un-zip to add in the extra wool (product page). |
| Fill weight | One maker states that its low-fill pillow holds 600 g of wool, and a 400 g bag turns it into a firm-fill version (product page). A soft pillow sits at the low-fill end. |
| Fibre micron band | Medium wool is 20-30 µm and strong wool is above 28 µm, with bedding listed among strong-wool uses (New Zealand wool micron guide). |
| Scent timeline | One maker states that about 1% of the lanolin, the sheep's own oils, is left in the wool after scouring and the smell usually fades within a few days as the pillow airs out (product page). |
| Care | Wash the cotton cover and air out the wool filling every few months (product page). |
Why the wool answer lands here
You chose soft and squashy, and that is the feel wool balls give. Each ball rolls past its neighbours under weight, so the pillow gives way softly instead of pushing back as one layer. The guide to wool batting, wool balls and shredded wool sets out how the three fills differ. The zip does half the work. You can take fill out until the pillow feels right and keep the spare for the day it settles.
The heat answer fits either way. If you often wake hot, wool helps because the fibre takes up moisture vapour and carries heat out with it, as the guide to how much moisture wool holds explains. If heat is rare, that moisture handling is a comfort, not the reason to choose wool. The scent answer works the same way. The guide to what scouring removes covers the sheep's own lanolin oils left behind, and airing the pillow outside before first use shortens the smell's run. The care answer suits balls well. Fresh air reaches right through the fill, and a shake breaks up clumps before they set.
The dust-mite answer needs a plain reading of the evidence. In a Melbourne study of mattress covers, not pillows, surfaces of sheepskin, wool and cotton mattress coverings carried 116, 113 and 19 µg of mite allergen per gram of fine dust, against 0.4 for impermeable encasements (study abstract). Victoria's health department advises readers to remove sheepskin or woollen underlays (Better Health Channel). So if mites concern you, the protection comes from a tightly woven encasement over the pillow, not from the wool inside it. Without that concern, nothing here changes.
When the wool fill would change
Three things would move the choice off loose balls. The first is support. If you sleep on your side with broad shoulders and want a high, fixed shape, batting holds one set form where balls shift. The second is washing. Felted balls tumbling in warm, soapy water can lock together into lumps, so read why a wool pillow felts if you want a pillow you can machine wash. The third is a diagnosed mite allergy. In that case the encasement comes first, and the fill matters far less than how often the cover is washed.
Testing wool height on your bed
Height is the one thing a specification cannot settle for you. Lie in your usual position for 10 minutes with the pillow at full fill. On the back, the chin should not tip toward the chest. On the side, the nose should line up with the centre of the breastbone and the neck should feel level. If not, take out a handful of balls and try again. Keep the spare fill in a cotton bag rather than plastic.
Give it a week, because balls settle as they warm and compress. A pillow that feels right on the first night may need a handful back by the end of the week, so shake it each morning. One wool seller advises keeping wool out of direct sunlight so it does not fade or weaken (care page), so a few hours of sun followed by shade is enough. If the spec lists a micron figure, the guide to reading micron, grade and staple shows you what it means.
More about wool pillows
- What is the difference between wool batting, wool balls, and shredded wool in a pillow?
- Why does crimp make wool work in a pillow?
- Why does a wool pillow felt, and can you wash one without it?
Back to choosing a wool pillow
Sources
Here are the pages, papers and shops this wool guide draws on, each named beside the question it answers.
- product page (thewoolroom.com), drawn on in “The construction”.
- product page (thewoolcompany.co.uk), drawn on in “The construction”.
- New Zealand wool micron guide (nzwool.co.nz), drawn on in “The construction”.
- product page (turmerry.com), drawn on in “The construction”.
- study abstract (missionallergy.com), drawn on in “Why the wool answer lands here”.
- Better Health Channel (betterhealth.vic.gov.au), drawn on in “Why the wool answer lands here”.
- care page (grampiansgoodsco.com.au), drawn on in “Testing wool height on your bed”.